Solder Wire
|
  |
Part # |
Description |
Specification |
Dimensions |
Price |
SDR-5842 |
138°C melt solder
Bismuth Tin solder
Also known as;
Bi 58% Sn 42%
Bi58/Sn42
Sn42/Bi58
58Bi 42Sn
58Bi/42Sn |
Bi58% Sn42%
Bismuth and Tin wire solder. An alloy made up of 58% Bismuth and 42% Tin with a melt point of 138°C or 280°F. Use with an RMA or RA flux. |
0.015 dia. x 2 feet long |
$4.00 |
SDR-6337 |
183°C melt solder
Lead Tin alloy
Also known as;
Sn 63% Pb 37% |
Sn63% Pb37% |
0.031 dia. x 6 feet long |
$2.00 |
SDR-6337-1LB |
183°C melt solder
Lead Tin alloy |
Sn63% Pb37% |
0.031 dia. x 1 LB spool |
$24.50 |
| SDR-9505 |
235°C melt solder
Tin Antimony Alloy |
Sn95% Sb05% Use with an RMA or RA flux. |
0.031 dia. x 6 feet long |
$2.00 |
| SDR-9505-1LB |
235°C melt solder
Tin Antimony Alloy |
Sn95% Sb05% Use with an RMA or RA flux. |
0.031 dia. x 1 LB Spool |
$41.50 |
Thermal Grease/Paste
-
Easy to apply
-
Allows for dissasembly
|
 |
Part # |
Info |
Description |
Composition |
Temperature range |
Thermal Conductivity |
Thermal Resistance |
Quantity |
Price |
| TG-AA-1.75G |
 |
Alumina thermal compound |
Aluminum oxide, boron nitride and zinc oxide. No Silicone |
-40 - 180°C |
4.0 W/mK (Hot Wire Method Per MIL-C-47113) |
0.010°C-in2/Watt |
1.8 grams |
$3.95 |
| TG-AA-14G |
|
Alumina thermal compound |
Aluminum oxide, boron nitride and zinc oxide. No Silicone |
-40 - 180°C |
4.0 W/mK (Hot Wire Method Per MIL-C-47113) |
0.010°C-in2/Watt |
14 grams |
$8.25 |
| TG-CMQ-2.5G |
|
Ceramique |
Aluminum oxide, boron nitride and zinc oxide. No Silicone |
-150 - 125°C |
200,000 W/m2.°C (0.001 inch layer) |
0.007°C-in2/Watt |
2.5 grams |
$4.25 |
| TG-CMQ-22G |
|
Ceramique |
Aluminum oxide, boron nitride and zinc oxide. No Silicone |
-150 - 125°C |
200,000 W/m2.°C (0.001 inch layer) |
0.007°C-in2/Watt |
22 grams |
$10.50 |
| TG-AS5-3.5G |
|
Arctic Siver 5 88% silver content |
Micronized Silver, aluminum oxide, boron nitride and zinc oxide. No Silicone |
-50 - 130°C |
350,000 W/m2 °C (0.001 inch layer) |
0.0045°C-in2/Watt |
3.5 grams |
$8.75 |
| TG-AS5-12G |
|
Arctic Siver 5 88% silver content |
Micronized Silver, aluminum oxide, boron nitride and zinc oxide. No Silicone |
-50 - 130°C |
350,000 W/m2 °C (0.001 inch layer) |
0.0045°C-in2/Watt |
12 grams |
$21.00 |
Thermal Sheets
-
Easy to apply, just cut to size and place in between.
-
Allows for easy disassembly, great for testing and prototyping.
|
 |
Part # |
Info |
Description |
Specification |
Dimensions |
Price |
TS-MFA4 |
|
0.004" thick, 6 x 6 inches in an aluminum foil substrate coated on both sides with a specially formulated non-silicone thermal grease that is naturally tacky but dry to the touch. Easily cut to size with scissors, then just peel and stick. |
4.5 W/mK , -45 to 200°C |
6 x 6 inches |
$7.50 |
TS-MFK6 |
|
0.006" thick, 6 x 6 inches in a Kapton (polymide) insulating substrate coated on both sides with specially formulated thermal grease (non-silicone, non-wax-based) that is naturally tacky but dry to the touch. It offers unique heat transfer and high insulating capabilities, and has a high cut-through resistance Easily cut to size with scissors, then just peel and stick. |
0.9 W/mK , -45 to 200°C |
6 x 6 inches |
$12.00 |
Thermal Epoxies
|
 |
Part # |
Info |
Description |
Composition |
Temperature range |
Thermal conductivity |
Quantity |
Price |
| TE-ASTA-7G |
|
Arctic Silver Thermal Adhesive |
62-65% silver content |
-40 - +150°C |
7.5 W/mK |
7 grams |
$16.95 |
| TE-SCSE-7G |
|
Arctic Silver Slow Cure Thermal Adhesive |
Arctic Silver Slow Cure Thermal Adhesive 60 minute pot life (usage time) and 300 minute set time 62-65% silver content |
-40 - +150°C |
7.5 W/mK |
7 grams |
$19.95 |
| TE-AATA-5G |
|
Arctic Alumina Thermal Adhesive |
Arctic Alumina Adhesive uses a layered
composite of aluminum oxide and boron nitride. It is a pure electrical
insulator, neither electrically conductive nor capacitive |
-40 - +150°C |
5+ W/mK |
5 grams |
$8.50 |
| TE-SCCE-5G |
|
Slow Cure Ceramic Thermal Adhesive |
Arctic Alumina Slow Cure 60 minute pot life (usage time) and 300 minute set time. Adhesive uses a layered
composite of aluminum oxide and boron nitride. It is a pure electrical
insulator, neither electrically conductive nor capacitive |
-40 - +150°C |
5+ W/mK |
5 grams |
$9.95 |
| TE-920H-2.5G |
|
Flexible Thermal 2 part Epoxy - Silver based |
FLEXIBLE Epoxy. This epoxy is ideal for bonding TECs to heatsinks and or cold plates. The flexibility allows for mismatched thermal expansions between different materials. |
-25 - +110°C |
1.55 W/mK
10.74 BTU-in/Ft2 -Hr -F |
2.5 grams |
$28.50 |
Heat Sinks |
 |
Part # |
Item |
Description |
Weight |
Price |
HSA-60-60-32-FN37
|
Heat Sink & Fan Assembly
Dynatron C62G |
Heat Sink Assembly: Overall dimensions of 63x63x64mm. Overall weight is 500 grams (1.1lbs).
Heatsink: 60x60x30mm all copper (C1020) high efficiency skived heatsink with 40 fins.
Fan: DC 12 volt fan 60x60x25mm, 37.6 CFM, 6800 RPM, with fan guard grill. Included Fan connector is Molex part # 22-01-3037. Mating PCB header (not included) is Molex part # 22-29-2031. See part # WM2745-ND at www.digi-key.com
Bracket: Includes anodized aluminum fan bracket with all screws.
Heatsink, Fan, and fan bracket comes assembled, but is easily dissassembled.
Heatsink is ready for you to drill/tap/epoxy for your application.
Ideal for mini and small TECs with Qmax from 0.1 to 25 watts.
Maximum TEC dimension is 30x30mm.
Maximum Heat Load of TECs with Qmax of up to 35 watts.
|
500 grams
1.1 lbs |
$24.50 |
HS-2.5-5.4-1.4-01
|
Heat Sink |
2.5x5.375x1.375
Extruded Aluminum, 21 fins, with 0.375 thick base, 1 inch length fins |
|
|
2 |
3.007 |
4 |
1.732 |
10 |
0.839 |
20 |
0.487 |
30 |
0.356 |
40 |
0.285 |
|
416 grams
0.92 lbs |
$12.00 |
HS-5.4-5.4-1.4-01
|
Heat Sink |
5.375x5.375x1.375
Extruded Aluminum, 21 fins, with 0.375 thick base, 1 inch length fins |
|
Thermal Resistance C/watt
|
2 |
1.427 |
4 |
0.822 |
10 |
0.397 |
20 |
0.231 |
30 |
0.168 |
40 |
0.135 |
|
890 grams
1.96 lbs |
$19.75 |
HSS-5.4-1.5-AL-01
|
Fan shroud and mounting bracket (120mm fan not included) |
To be used with Heat Sink HS-5.4-5.4-1.4-01 (above)
5.4x5.4x1.5
Aluminum 5052, 0.63" thick with 4 mounting holes for 120mm fan and four screw holes for heat sink |
 Drawing
| Bracket only |
Bracket w/ Fan mounted |
Bracket & Fan & Heat sink |
 |
 |
 |
| Click on images to enlarge |
|
67 grams
0.15 lbs |
$12.00 |
Fans
|
 |
Part # |
Info |
Description |
SIZE |
CFM |
RPM |
Price |
FN-092-110
|
12v |
Brand VANTEC
Model TD9238H Fan Size 92mm
Bearing Type: 2 Ball DC 12 volt
|
92 x 92 x 38 mm |
110 |
4800 |
$24.50 |
FN-120-134
|
12v |
Brand Scythe
DFS123812-3000 "ULTRA KAZE" Fan Size 120mm
Bearing Type: 2 Ball DC 12 volt
|
120 x 120 x 38 mm |
134 |
3000 |
$20.00 |
FNLK-120-01
|
leg Kit
|
Leg Kit for 92mm and 120mm fans.
Elevates fan 1.25" above table surface to allow free flow of air into fan.
(Fan not included)
|
1.25" elevation |
- |
- |
$6.00 |
Cold Plates & Extender Blocks
|
 |
Part # |
Specs |
Description |
Material |
Uses |
Weight |
Prices |
| 1-9 pcs |
10-24 pcs |
CP-0.91-0.91-AL-01
|
|
Cold / Specimen Plate
0.906"x0.906"x0.12" (23x23x3.1mm)
With 0.030" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Specimens and other articles are place on the plate for cooling or heating. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
4.5 grams (0.01 lbs) |
$5.00 |
$4.00 |
CP-1.0-1.0-AL-01
|
|
Cold / Specimen Plate
1.0"x1.0"x0.12" (25.4x25.4x3.1mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Specimens, microscope slides, and other articles are place on the plate for cooling or heating. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
5.5 grams (0.012 lbs) |
$5.00 |
$4.00 |
CP-1.25-1.25-AL-01
|
|
Cold / Specimen Plate
1.25"x1.25"x0.12" (31.75x31.75x3.1mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Specimens, microscope slides, and other articles are place on the plate for cooling or heating. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
8.5 grams (0.019 lbs) |
$6.00 |
$5.00 |
CP-1.63-1.63-AL-01
|
|
Cold / Specimen Plate
1.625"x1.625"x0.12" (41.28x41.28x3.1mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Specimens, microscope slides, and other articles are place on the plate for cooling or heating. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
14 grams (0.031 lbs) |
$7.50 |
$5.50 |
CP-2.0-1.0-AL-01
|
|
Cold / Specimen Plate
2.0"x1.0"x0.12" (50.8x25.4x3.1mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Specimens, microscope slides, and other articles are place on the plate for cooling or heating. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
10.5 grams (0.023 lbs) |
$7.50 |
$5.50 |
CP-2.0-2.0-AL-01
|
|
Cold / Specimen Plate
2.0"x2.0"x0.12" (50.8x50.8x3mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
20 grams (0.044 lbs) |
$8.50 |
$6.50 |
CP-2.0-2.0-AL-02
|
|
Cold / Specimen Plate Extender or Spacer Block
2.0"x2.0"x0.25" (50.8x50.8x6.4mm)
With 0.040" thermocouple hole |
Aluminium alloy 6061 with super smooth surfaces of 32 micro inches or better |
To be mounted on top of a Peltier TEC. Can also be used as an extender block for 50x50mm TECs Accurate temperature can be aquired by placing a thermistor or thermocouple in the provided hole. |
43 grams (0.095 lbs) |
$9.50 |
$7.50 |
Shoulder Washers
|
 |
Part # |
Description |
Flange Thickness |
Shoulder OD |
ID |
OD |
LENGTH |
Price |
| FST-SW-04-0.50 |
#4 Nylon Shoulder Washer Can be easily cut to length |
.046 |
.235 |
.115 |
.145 |
.5 |
4 pcs $2.00
20pcs $6.00
100 pcs $16.00
|
| FST-SW-06-0.50 |
#6 Nylon Shoulder Washer Can be easily cut to length |
.046 |
.29 |
.14 |
.17 |
.5 |
4 pcs $2.00
20pcs $6.00
100 pcs $16.00 |
| FST-SW-08-0.75 |
#8 Nylon Shoulder Washer Can be easily cut to length
|
.062 |
.344 |
.173 |
.205 |
.75 |
4 pcs $2.00
20pcs $6.00
100 pcs $16.00 |
| FST-SW-10-0.75 |
#10 Nylon Shoulder Washer Can be easily cut to length
|
.062 |
.399 |
.20 |
.26 |
.75 |
4 pcs $2.00
20pcs $6.00
100 pcs $16.00 |
| FST-SW-14-0.75 |
1/4" Nylon Shoulder Washer Can be easily cut to length
|
.062 |
.513 |
.26 |
.312 |
.75 |
4 pcs $2.00
20pcs $6.00
100 pcs $16.00 |
|
