Custom Thermoelectric - Peltier

TS-MFA4 Thermal Sheet 152 x 152mm

Only 4 left


Availability: In stock

  • Buy 10 for $6.75 each and save 10%
  • Buy 25 for $6.50 each and save 14%
Pin It

picture of easy to use thermal sheet thermal Interface Material TIM in 152x152mm 6x6inch size part number TS-MFA4

More Views

TS-MFA4 Thermal Sheet

  • Part Number: TS-MFA4
  • Micro-Faze A-4 Thermal Interface Material (TIM).
  • Temperature range: -45 to 200°C (-49 to 392°F)
  • Non silicone based
  • Thermal resistance 0.10 to 0.20 °C in2/W @70 psi.
  • 6.0 x 6.0 inch sheet
  • Just 0.004" (0.10mm) thick before compression.
  • Just cut to size with scissors or an X-acto knife.

TS- MFA4 Thermal Sheet

MICRO-FAZE® A4 is a revolutionary thermal interface pad formulated with non-silicone thermal grease. It was developed to offer low thermal resistance in a thermal interface at this thickness without the mess of grease.

  • Easy to use: Just cut to size with scissors or a knife.
  • Consists of a 2 mil aluminum substrate coated on both sides with a specially formulated thermal compound (non-silicone, non-wax based) that is naturally tacky but dry to the touch.
  • MICRO-FAZE A4 retains all the unique advantages of higher thermal performance silicone-based thermal greases but in the form of a thermal sheet.
  • Unlike phase change materials, MICRO-FAZE A4 requires relatively low force to achieve total interface contact and heat transfer starts at ambient temperature.
  • MICRO-FAZE A4 allows for total “wetting action” to fill all microscopic surface voids without changing phase.
  • Offers maximum heat transfer capability.
  • Excellent replacement for phase change materials and silicone pads.
  • MICRO-FAZE A4 is a “drop-in-place” product for easy handling in a manufacturing environment.
  • Thixotropic nature prevents run out.


  • PDF file icon
    Specification Sheet