Cold Plate with Mounting Holes

3D Models under the Drawings tab

• Part Number: CPT-2.25-1.62-0.25-AL
• Material: Aluminum alloy 6061
• Overall Dimensions: 2.25 x 1.62 x 0.25" (57.15 x 41.15 x 6.3mm)
• Two holes are tapped for 4-40 machine screws.
• Weight: 31 grams (.07 lbs)

Cold Plate with Mounting Holes

Cold plates with Mounting Holes are intended to be used with a specific water block. The cold plate is mounted with two machine screws to the water block and usually "sandwiches" a TEC or TEG in between. Specimens and other articles are placed on the top of the cold plate for cooling or heating. Accurate temperature sensing can be acquired by placing a thermistor or thermocouple in the provided hole.

• Ideal as a cold plate to be used with our WBA-1.62-0.55-CU-01 water block.
• Any 40x 40mm TEC may be used with this cold plate and the above mentioned water block.
• Aluminum alloy 6061.
• Temperature sensor hole included.
• Smooth surface of 32 micro inches or better.
• Ready to drill, tap, cut, or modify as needed for your application.

NOTE: Many of the 2D and 3D CAD models are "Defeatured". This means the 2D and 3D CAD models provided may withhold details and dimensions of the internal structures in order to protect the proprietary features of the product. By downloading any of the above CAD files, you accept the conditions of our CAD Disclaimer.