Custom Thermoelectric - Peltier

TS-MFK6 Thermal Sheet 152 x 152mm

Only 10 left


Availability: In stock

  • Buy 10 for $25.20 each and save 11%
  • Buy 25 for $24.10 each and save 15%
Pin It

picture of electrically insulating thermal sheet thermal Interface Material TIM in 152x152mm 6x6inch size part number TS-MFK6

More Views

TS-MFK6 Thermal Sheet

  • Part Number: TS-MFK6
  • Electrically insulating version with Kapton substrate
  • Micro-Faze K6 Thermal Interface Material (TIM).
  • Temperature range: -45 to 200°C (-49 to 392°F)
  • Non silicone based
  • Thermal resistance 0.40 °C in2/W @70 psi.
  • 6.0 x 6.0 inch sheet
  • Just 0.006" (0.152mm) thick before compression.
  • Just cut to size with scissors or an X-acto knife.

TS-MFK6 Thermal Sheet

MICRO-FAZE® K is a revolutionary dry-to-touch thermal interface pad formulated with non-silicone thermal grease. It was developed to offer the lowest thermal resistance in a thermal interface without the mess of grease. MICRO-FAZE K is a polyimide insulating substrate coated on both sides with specially formulated thermal grease (non-silicone, non-wax-based) that is naturally tacky but dry to the touch. It offers unique heat transfer and high insulating capabilities, and has a high cut-through resistance.

  • Easy to use: Just cut to size with scissors or a knife.
  • Will not electrically conduct as the polyimide (Kapton) substrate is electrically insulating.
  • Consists of a 2 mil Kapton (polyimide) substrate coated on both sides with a specially formulated thermal compound (non-silicone, non-wax based) that is naturally tacky but dry to the touch.
  • MICRO-FAZE K6 retains all the unique advantages of higher thermal performance thermal greases but in the form of a thermal sheet.
  • Unlike phase change materials, MICRO-FAZE K6 requires minimum force to achieve total interface contact and heat transfer starts at 25ºC.
  • MICRO-FAZE K6 allows for total “wetting action” to fill all microscopic surface voids without changing phase.
  • Offers maximum heat transfer capability and electrical isolation for power components.
  • Excellent replacement for phase change materials and silicone pads.
  • MICRO-FAZE K6 is a “drop-in-place” product for easy handling in a manufacturing environment.
  • Thixotropic nature prevents run out.


  • PDF file icon
    Specification Sheet