Mini Micro Liquid Cold Plate Water Block Assembly

3D Models under the Drawings tab

• Part Number: WBA-0.60-0.28-CU-01
• Overall body dimensions: 0.59 x 0.59 x 0.28" (L x W x H).
• Usable area of 15 x 15mm (.59 x .59 inches).
• Weight: XXX (0.XX lb)
• Copper tube for inlet and outlet.
• CNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .
• Solder brazed construction.

NOTE: Some pictures may show the water block as separate pieces. This is only to show the details of the interior. All water blocks come assembled ready to use. Any TECs or TEGs shown are for demonstration purposes only and are not included with the water block. Barbed fittings are optional.

Liquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, lasers, power electronics, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.

Very high surface area internal flow path for maximum heat transfer.

Measures: 0.59 x 0.59 x 0.28 inches.

Usable flat area of 0.59 x 0.59 inches (15 x 15 mm).

Liquid volume (internal) is 0.292 ml.

2 mounting holes tapped for 2-56 screws.

Inlet and Outlet on the same side.

0.156" OD copper tubing for inlet and outlet.

Use 0.125" ID flexible tubing to connect.

Maximum service temperature is 150 C.

Manufactured and assembled in Bishopville, MD U.S.A.

This copper liquid cold plate will accommodate per side;

Any object to be cooled up to 15 x 15mm.

Single TECs or TEGs up to 15 x 15mm.

CNC Machined from a solid billet of Copper 110 alloy.

This water block has been tested with a heat load of up to 120 watts. All indications showed that it could handle higher loads.

This liquid cold plate or water block is considered a mini or miniature liquid cooled cold plate. Custom versions can be made. Please contact us for a quote on your specific requirements.

NOTE: Many of the 2D and 3D CAD models are "Defeatured". This means the 2D and 3D CAD models provided may withhold details and dimensions of the internal structures in order to protect the proprietary features of the product. By downloading any of the above CAD files, you accept the conditions of our CAD Disclaimer.