Liquid Cold Plate Water Block Assembly

3D Models under the Drawings tab

• Part Number: WBA-1.62-0.55-CU-01
• Overall body dimensions: 1.62 x 1.62 x 0.55" (L x W x H).
• Each side has usable area of 41.0 x 41.0mm (1.62 x 1.62 inches).
• 1/16" NPT threaded inlet and outlet.
• Weight: 160g (0.353 lb)
• Total External surface Area: 9.285 in² (59.9 cm²)
• Option to add 2 pieces of Nylon barbed fittings for 3/16" ID tubing.
• CNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].

NOTE: Some pictures may show the waterblock as separate pieces. This is only to show the details of the interior. All waterblocks come assembled ready to use. Any TECs or TEGs shown are for demonstration purposes only and are not included with the water block. Barbed fittings are optional.

Liquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.

• Very high surface area internal flow path for maximum heat transfer.
• Measures: 1.62 x 1.62 x 0.55 inches.
• Each side usable flat area of 1.62 x 1.62 inches (41.0 x 41.0 mm).
• Both sides may be used at the same time.
• Liquid volume (internal) is 0.360 inches³ (5.90 cm³ or ml)
• 2 mounting lugs with holes.
• Solder brazed 100 psi watertight seal.
• Inlet and Outlet on the same side.
• 1/16" NPT threaded inlet and outlet.
• Option to add 2 pieces of Nylon barbed fittings for 3/16" ID tubing.
• Maximum service temperature is 150 C.
• Manufactured and assembled in Bishopville, MD U.S.A.

This aluminum liquid cold plate waterblock will accommodate;

• Any object to be cooled up to 41 x 41mm.
• 2, 3, or 4 TECs or TEGs up to 20 x 20mm.

CNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].

NOTE: Many of the 2D and 3D CAD models are "Defeatured". This means the 2D and 3D CAD models provided may withhold details and dimensions of the internal structures in order to protect the proprietary features of the product. By downloading any of the above CAD files, you accept the conditions of our CAD Disclaimer.