Liquid Cold Plate Water Block Assembly  2nd Generation

3D Models under the Drawings tab

• Part Number: WBA-3.0-0.90-AL-2G
• Overall body dimensions: 3.0 x 3.0 x 0.90" (L x W x H).
• Usable area of 65.0 x 65.0mm (2.56x 2.56 inches).
• Weight: 232 grams (0.51 lb)
• 1/4" NPT threaded inlet and outlet.
• Option to add 2 pieces of brass barbed fittings for 1/2" ID tubing.
• CNC machined from solid Alloy 6061 aluminum billet.

NOTE: Some pictures may show the waterblock as separate pieces. This is only to show the details of the interior. All waterblocks come assembled ready to use. Any TECs or TEGs shown are for demonstration purposes only and are not included with the water block. Barbed fittings are optional.

Liquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.

• 2nd Generation Design with improved fluid flow and recessed screw heads
• Very high surface area internal flow path for maximum heat transfer.
• Measures: 3.0 x 3.0 x 0.90 inches.
• Usable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).
• Liquid volume (internal) is XXX ml.
• 8 mounting holes tapped for 6-32 screws
• Inlet and Outlet on the same side.
• 1/4" NPT threaded inlet and outlet.
• Option to add 2 pieces of brass barbed fittings for 1/2" ID tubing.
• Maximum service temperature is 125 C.
• Manufactured and assembled in Bishopville, MD U.S.A.

This waterblock will accommodate;

• Any object to be cooled up to 65 x 65mm.
• 2, 3, or 4 TECs or TEGs up to 30 x 30mm.

CNC machined from solid Alloy 6061 aluminum billet.

This aluminum liquid cold plate water block has been tested with a heat load of up to 1200 watts. All indications showed that it could handle higher loads.

O-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.

NOTE: Many of the 2D and 3D CAD models are "Defeatured". This means the 2D and 3D CAD models provided may withhold details and dimensions of the internal structures in order to protect the proprietary features of the product. By downloading any of the above CAD files, you accept the conditions of our CAD Disclaimer.