Copper Liquid Cold Plate Water Block Assembly

3D Models under the Drawings tab

• Part Number: WBA-3.0-0.90-CU-2G
• Overall body dimensions: 3.0 x 3.0 x 0.90" (L x W x H).
• Usable area of 65.0 x 65.0mm (2.56x 2.56 inches).
• Weight: 771gm (1.70 lb)
• 1/4" NPT threaded inlet and outlet.
• Option to add 2 pieces of brass barbed fittings for 1/2" ID tubing.
• CNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .

NOTE: Some pictures may show the waterblock as separate pieces. This is only to show the details of the interior. All water blocks come assembled ready to use. Any TECs or TEGs shown are for demonstration purposes only and are not included with the water block. Barbed fittings are optional.

Liquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, IGBTs, or just about any component. Liquid cooling cold plates are the most efficient method of removing heat from multiple TECs or TEGs.

• New 2nd Generation design with improved flow path, reduced pressure drop, and lighter in weight.
• Very high surface area internal flow path for maximum heat transfer.
• Measures: 3.0 x 3.0 x 0.90 inches.
• Usable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).
• Liquid volume (internal) is 2.67 cubic inches, 43.77 ml.(cm3)
• 8 mounting holes tapped for 6-32 screws
• Inlet and Outlet on the same side.
• 1/4" NPT threaded inlet and outlet.
• Option to add 2 pieces of brass barbed fittings for 1/2" ID tubing.
• Maximum service temperature is 125 C.
• Manufactured and assembled in Bishopville, MD U.S.A.

This waterblock will accommodate;

• Any object to be cooled up to 65 x 65mm.
• 2, 3, or 4 TECs or TEGs up to 30 x 30mm.

CNC machined from solid 99.9% pure copper.

This copper liquid cold plate waterblock has been tested with a heat load of up to 1200 watts. All indications showed that it could handle higher loads.

Standard O-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us if you need other materials.

Click here to see 3.0 Inch O-rings

Call or Email us for custom options or to create custom Liquid Cold Plates for you.

NOTE: Many of the 2D and 3D CAD models are "Defeatured". This means the 2D and 3D CAD models provided may withhold details and dimensions of the internal structures in order to protect the proprietary features of the product. By downloading any of the above CAD files, you accept the conditions of our CAD Disclaimer.