Custom Thermoelectric - Peltier

Thermoelectric Generators (TEGs)

Thermoelectric Generators (TEGs)

ThermoElectric Generators (TEGs), are also known as Seebeck devices, Peltier generators, and more. TEGs turn waste heat into usable power by taking advantage of a heat source and a cold sink.  Thermoelectric generators are ideal for remote locations that are off grid but have a heat source.

Some example heat sources are; furnaces, wood stoves, fireplaces, pellet stoves, exhaust pipes, gasoline and diesel engines, solar collectors, solar concentrators, rocket mass heaters, boilers, and so many others.  Waste heat is everywhere and is available for harvesting power.

Simply provide a heat source (up to 320C [608F]) and a method of cooling the cold side.  The greater the difference in temperature between the hot side of the TEG and the cold side, the greater the electrical power produced. A difference of 10 degrees C will produce miliwatts per TEG and a difference of 270 C can produce as much as 21 watts of electrical power. As heat passes through the TEG from the hot side to the cold side, electrical power is produced by the semiconductor pellets. The efficiency of this heat flow to electricity conversion increases as the delta T [Delta T = Thot - Tcold] gets larger.  The greater the delta T, the greater the efficiency.  The efficiency reaches a maximum of about 7.5%.  An easy way of thinking about this efficiency is that for every 100 watts of heat passing through the TEG, a maximum of 7.5 watts of electricity will be generated.

Keep in mind that the most difficult task in waste heat harvesting using a TEG is maintaining  a cool temperature on the cold side.  Even when the TEG is operating at maximum efficiency, there is still 92.5% of the heat reaching the cold side (100-7.5%).  This heat must be eliminated or else the cold side of the TEG will no longer be the "cold side" as it will heat up quickly.  Air cooling may be sufficient for 1 or 2 TEGs, but liquid cooling is a far better method to keep the cold side cool.

Please see our TEG Encyclopedia for how it works. See our TEG Installation Guide on how to install them.

  • TEG Modules
  • TEG Electronics
  • TEG Accessories

25 Item(s)

per page

List  Grid 

Set Descending Direction
  1. 1261G-7L31-04CL ThermoElectric Generator 30 x 30mm
  2. 1261G-7L31-04CQ ThermoElectric Generator 40 x 40mm
  3. 1261G-7L31-05CQ ThermoElectric Generator 40 x 40mm
  4. 1261G-7L31-10CX1 ThermoElectric Generator 56 x 56mm
  5. 1261G-7L31-24CX1 ThermoElectric Generator 56 x 56mm
  6. 1991G-7L31-12CQ ThermoElectric Generator 40 x 40mm
  7. 2411G-7L31-10CX1 ThermoElectric Generator 56 x 56mm
  8. 2411G-7L31-15CX1 ThermoElectric Generator 56 x 56mm
  9. Picture of ELC-BVB040 Voltage booster circuit. It boosts 0.040 volts up to 10 volts Step up DC to DC converter
  10. Picture of ELC-BVB120 Voltage booster circuit. It boosts 0.120 volts up to 10 volts Step up DC-DC converter
  11. Picture of ELC-UVB040 Voltage booster circuit. It boosts 0.040 volts up to 10 volts Step up DC/DC converter
  12. Picture of ELC-UVB120 Voltage booster circuit. It boosts 0.12 volts up to 10 volts Step up DC to DC converter
  13. ELC-VB0815-1  Unipolar Voltage Booster 80mV
  14. ELC-VBSTROBE VB Strobe Accessory Board
    $10.50
  15. ELC-X0122 Step Up/Down DC-DC Converter
  16. ELC-Y0701 Step Up DC-DC Converter
  17. image of TEG-DMO Hand Heat Thermoelectric Generator (TEG) Demonstrator
  18. picture of TEG-DMO-ADV Advanced Hand Heat Thermoelectric Generator (TEG) Demonstrator
  19. picture of graphite foil thermal Interface Material TIM in 150x150mm 5.9 x 5.9 inch size part number TF-150150
  20. picture of graphite foil thermal Interface Material TIM in 30x30mm size part number TF-3030
  21. image of graphite foil thermal Interface Material TIM in 40x40mm size part number TF-4040
  22. picture of graphite foil thermal Interface Material TIM in 56x56mm size part number TF-5656
  23. image of Pure Indium foil sheet thermal interface material TIM 150 x 150 x 0.05 mm part number TF-IF150150
  24. image of Pure Indium foil sheet thermal interface material TIM 150 x 150 x 0.10 mm part number TF-IF150150-0.10
  25. TF-IF5050 image of Pure Indium foil thermal interface material TIM 50 x 50 x 0.05 mm part number TF-IF5050

25 Item(s)

per page

List  Grid 

Set Descending Direction